본문 바로가기
조회 수 9979 추천 수 0 댓글 0
?

단축키

Prev이전 문서

Next다음 문서

+ - Up Down Comment Print Files
?

단축키

Prev이전 문서

Next다음 문서

+ - Up Down Comment Print Files

http://www.binarytides.com/linux-commands-monitor-network/

1. Nload

Nload is a commandline tool that allows users to monitor the incoming and outgoing traffic separately. It also draws out a graph to indicate the same, the scale of which can be adjusted. Easy and simple to use, and does not support many options.

So if you just need to take a quick look at the total bandwidth usage without details of individual processes, then nload will be handy.

$ nload

01.nload.png

Installing Nload - Fedora and Ubuntu have got it in the default repos. CentOS users need to get nload from Epel repositories.

# fedora or centos
$ yum install nload -y

# ubuntu/debian
$ sudo apt-get install nload

2. iftop

Iftop measures the data flowing through individual socket connections, and it works in a manner that is different from Nload. Iftop uses the pcap library to capture the packets moving in and out of the network adapter, and then sums up the size and count to find the total bandwidth under use.

Although iftop reports the bandwidth used by individual connections, it cannot report the process name/id involved in the particular socket connection. But being based on the pcap library, iftop is able to filter the traffic and report bandwidth usage over selected host connections as specified by the filter.

$ sudo iftop -n

The n option prevents iftop from resolving ip addresses to hostname, which causes additional network traffic of its own.

02.iftop.png

Install iftop - Ubuntu/Debian/Fedora users get it from default repos. CentOS users get it from Epel.

# fedora or centos
yum install iftop -y

# ubuntu or debian
$ sudo apt-get install iftop

3. iptraf

Iptraf is an interactive and colorful IP Lan monitor. It shows individual connections and the amount of data flowing between the hosts. Here is a screenshot

$ sudo iptraf

03.iptraf.png

Install iptraf

# Centos (base repo)
$ yum install iptraf

# fedora or centos (with epel)
$ yum install iptraf-ng -y

# ubuntu or debian
$ sudo apt-get install iptraf iptraf-ng

4. nethogs

Nethogs is a small 'net top' tool that shows the bandwidth used by individual processes and sorts the list putting the most intensive processes on top. In the event of a sudden bandwidth spike, quickly open nethogs and find the process responsible. Nethogs reports the PID, user and the path of the program.

$ sudo nethogs

04.nethogs.png

Install Nethogs - Ubuntu, Debian, Fedora users get from default repos. CentOS users need Epel

# ubuntu or debian (default repos)
$ sudo apt-get install nethogs

# fedora or centos (from epel)
$ sudo yum install nethogs -y

5. bmon

Bmon (Bandwidth Monitor) is a tool similar to nload that shows the traffic load over all the network interfaces on the system. The output also consists of a graph and a section with packet level details.

05.bmon-640x480.png

Install Bmon - Ubuntu, Debian and Fedora users can install from default repos. CentOS users need to setup repoforge, since its not available in Epel.

# ubuntu or debian
$ sudo apt-get install bmon

# fedora or centos (from repoforge)
$ sudo yum install bmon

Bmon supports many options and is capable of producing reports in html format. Check the man page for more information

6. slurm

Slurm is 'yet' another network load monitor that shows device statistics along with an ascii graph. It supports 3 different styles of graphs each of which can be activated using the c, s and l keys. Simple in features, slurm does not display any further details about the network load.

$ slurm -s -i eth0

06.slurm.png

Install slurm

# debian or ubuntu
$ sudo apt-get install slurm

# fedora or centos
$ sudo yum install slurm -y

7. tcptrack

Tcptrack is similar to iftop, and uses the pcap library to capture packets and calculate various statistics like the bandwidth used in each connection. It also supports the standard pcap filters that can be used to monitor specific connections.

07.tcptrack.png

Install tcptrack - Ubuntu, Debian and Fedora have it in default repos. CentOS users need to get it from RepoForge as it is not available in Epel either.

# ubuntu, debian
$ sudo apt-get install tcptrack

# fedora, centos (from repoforge repository)
$ sudo yum install tcptrack

8. Vnstat

Vnstat is bit different from most of the other tools. It actually runs a background service/daemon and keeps recording the size of data transfer all the time. Next it can be used to generate a report of the history of network usage.

$ service vnstat status
 * vnStat daemon is running

Running vnstat without any options would simply show the total amount of data transfer that took place since the date the daemon is running.

$ vnstat
Database updated: Mon Mar 17 15:26:59 2014

   eth0 since 06/12/13

          rx:  135.14 GiB      tx:  35.76 GiB      total:  170.90 GiB

   monthly
                     rx      |     tx      |    total    |   avg. rate
     ------------------------+-------------+-------------+---------------
       Feb '14      8.19 GiB |    2.08 GiB |   10.27 GiB |   35.60 kbit/s
       Mar '14      4.98 GiB |    1.52 GiB |    6.50 GiB |   37.93 kbit/s
     ------------------------+-------------+-------------+---------------
     estimated      9.28 GiB |    2.83 GiB |   12.11 GiB |

   daily
                     rx      |     tx      |    total    |   avg. rate
     ------------------------+-------------+-------------+---------------
     yesterday    236.11 MiB |   98.61 MiB |  334.72 MiB |   31.74 kbit/s
         today    128.55 MiB |   41.00 MiB |  169.56 MiB |   24.97 kbit/s
     ------------------------+-------------+-------------+---------------
     estimated       199 MiB |      63 MiB |     262 MiB |

To monitor the bandwidth usage in realtime, use the '-l' option (live mode). It would then show the total bandwidth used by incoming and outgoing data, but in a very precise manner without any internal details about host connections or processes.

$ vnstat -l -i eth0
Monitoring eth0...    (press CTRL-C to stop)

   rx:       12 kbit/s    10 p/s          tx:       12 kbit/s    11 p/s

Vnstat is more like a tool to get historic reports of how much bandwidth is used everyday or over the past month. It is not strictly a tool for monitoring the network in real time.

Vnstat supports many options, details about which can be found in the man page.

Install vnstat

# ubuntu or debian
$ sudo apt-get install vnstat

# fedora or centos (from epel)
$ sudo yum install vnstat

9. bwm-ng

Bwm-ng (Bandwidth Monitor Next Generation) is another very simple real time network load monitor that reports a summary of the speed at which data is being transferred in and out of all available network interfaces on the system.

$ bwm-ng
bwm-ng v0.6 (probing every 0.500s), press 'h' for help
  input: /proc/net/dev type: rate
  /         iface                   Rx                   Tx                T
ot==========================================================================
==           eth0:           0.53 KB/s            1.31 KB/s            1.84
KB             lo:           0.00 KB/s            0.00 KB/s            0.00
KB--------------------------------------------------------------------------
--          total:           0.53 KB/s            1.31 KB/s            1.84
KB/s

If the console size is sufficiently large, bwm-ng can also draw bar graphs for the traffic using the curses2 output mode.

$ bwm-ng -o curses2

Install Bwm-NG - On CentOS bwm-ng can be installed from Epel.

# ubuntu or debian
$ sudo apt-get install bwm-ng

# fedora or centos (from epel)
$ sudo apt-get install bwm-ng

10. cbm - Color Bandwidth Meter

A tiny little simple bandwidth monitor that displays the traffic volume through network interfaces. No further options, just the traffic stats are display and updated in realtime.

10.cbm.png

$ sudo apt-get install cbm

11. speedometer

Another small and simple tool that just draws out good looking graphs of incoming and outgoing traffic through a given interface.

$ speedometer -r eth0 -t eth0

11.speedometer.png

Install speedometer

# ubuntu or debian users
$ sudo apt-get install speedometer

12. Pktstat

Pktstat displays all the active connections in real time, and the speed at which data is being transferred through them. It also displays the type of the connection, i.e. tcp or udp and also details about http requests if involved.

$ sudo pktstat -i eth0 -nt

12.pktstat.png

$ sudo apt-get install pktstat

13. Netwatch

Netwatch is part of the netdiag collection of tools, and it too displays the connections between local host and other remote hosts, and the speed at which data is transferring on each connection.

$ sudo netwatch -e eth0 -nt

13.netwatch.png

$ sudo apt-get install netdiag

14. Trafshow

Like netwatch and pktstat, trafshow reports the current active connections, their protocol and the data transfer speed on each connection. It can filter out connections using pcap type filters.

Monitor only tcp connections

$ sudo trafshow -i eth0 tcp

14.trafshow.png

$ sudo apt-get install netdiag

15. Netload

The netload command just displays a small report on the current traffic load, and the total number of bytes transferred since the program start. No more features are there. Its part of the netdiag.

$ netload eth0

15.netload.png

$ sudo apt-get install netdiag

16. ifstat

The ifstat reports the network bandwidth in a batch style mode. The output is in a format that is easy to log and parse using other programs or utilities.

$ ifstat -t -i eth0 0.5
  Time           eth0       
HH:MM:SS   KB/s in  KB/s out
09:59:21      2.62      2.80
09:59:22      2.10      1.78
09:59:22      2.67      1.84
09:59:23      2.06      1.98
09:59:23      1.73      1.79

Install ifstat - Ubuntu, Debian and Fedora users have it in the default repos. CentOS users need to get it from Repoforge, since its not there in Epel.

# ubuntu, debian
$ sudo apt-get install ifstat

# fedora, centos (Repoforge)
$ sudo yum install ifstat

17. dstat

Dstat is a versatile tool (written in python) that can monitor different system statistics and report them in a batch style mode or log the data to a csv or similar file. This example shows how to use dstat to report network bandwidth

$ dstat -nt
-net/total- ----system----
 recv  send|     time     
   0     0 |23-03 10:27:13
1738B 1810B|23-03 10:27:14
2937B 2610B|23-03 10:27:15
2319B 2232B|23-03 10:27:16
2738B 2508B|23-03 10:27:17

Install dstat

18. collectl

Collectl reports system statistics in a style that is similar to dstat, and like dstat it is gathers statistics about various different system resources like cpu, memory, network etc. Over here is a simple example of how to use it to report network usage/bandwidth.

$ collectl -sn -oT -i0.5
waiting for 0.5 second sample...
#         <----------Network---------->
#Time       KBIn  PktIn  KBOut  PktOut 
10:32:01      40     58     43      66 
10:32:01      27     58      3      32 
10:32:02       3     28      9      44 
10:32:02       5     42     96      96 
10:32:03       5     48      3      28

Install Collectl

# Ubuntu/Debian users
$ sudo apt-get install collectl

#Fedora
$ sudo yum install collectl



Title
List of Articles
번호 제목 글쓴이 날짜 조회 수
448 /boot 파티션 손상시 복구 방법 Hojung 2011.01.07 27653
447 /proc/meminfo 내용 설명 Hojung 2011.01.07 21932
446 1.txt ~ 999.txt 파일명을 001.txt ~ 999.txt 로 변경하기 Hojung 2010.12.31 17247
445 10 Ways to Generate a Random Password from the Command Line Hojung 2014.11.16 5958
» 18 commands to monitor network bandwidth on Linux server file Hojung 2014.04.13 9979
443 20 Linux System Monitoring Tools Every SysAdmin Should Know (Cool!) Hojung 2009.10.20 12389
442 59 Open Source Tools That Can Replace Popular Security Software Hojung 2011.06.16 22288
441 A simple Linux backup method Hojung 2010.11.25 21262
440 About initrd from Wikipedia Hojung 2008.01.06 17241
439 Add arguments from previous command Hojung 2011.08.22 16759
438 Advanced SSH security tips and tricks Hojung 2011.08.18 14319
437 Apaceh2 + SSL on Fedora Core Hojung 2007.12.14 46648
436 Apache 2 with SSL/TLS (https) Hojung 2012.07.20 9683
435 Apache 2 with SSL/TLS: Step-by-Step, Part 1 Hojung 2007.12.14 16418
434 Apache2 + MongoDB + ElasticSearch + Kibana file Hojung 2014.03.16 13235
433 APM (Apache + PHP + MySQL) with phpmyadmin in CentOS VM Hojung 2014.11.16 6926
432 ARP Spoofing 감지하기 (arpwatch) Hojung 2011.01.14 25797
431 arping Hojung 2007.11.18 25521
430 ATI x1300 on Fedora Core 10 Hojung 2009.04.20 22258
429 awk 명령어 간단 사용법 Hojung 2009.03.11 17730
Board Pagination ‹ Prev 1 2 3 4 5 6 7 8 9 10 ... 23 Next ›
/ 23

Designed by sketchbooks.co.kr / sketchbook5 board skin

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소

Sketchbook5, 스케치북5

Sketchbook5, 스케치북5

Sketchbook5, 스케치북5

Sketchbook5, 스케치북5